Connecting The Voltage Supply - Zumtobel ONLITE central CPS K Installation Instructions Manual

4.2 Connecting the voltage supply

Up to seven (CPS H) or six (CPS K) external sub distributions can be connected to an
ONLITE central CPS system.
Two outgoing fuses are available for each sub distribution in the switch cabinet of the
ONLITE central CPS system. The power supply lines for the sub distributions must be wired
directly to the outgoing fuses.
Description of the outgoing fuses
External sub distribution
UV03
UV04
UV05
UV06
UV07
UV08
UV09 (only CPS H)
i
The cable types and line cross sections required for the voltage supply of the sub
distributions can be found in the overall connecting diagram of your
ONLITE central CPS system.
For a permissible voltage drop also the distance and connected load are to be
considered during line dimensioning.
Fuse label
4F103+ and 4F103-
4F104+ and 4F104-
4F105+ and 4F105-
4F106+ and 4F106-
4F107+ and 4F107-
4F108+ and 4F108-
4F109+ and 4F109-
24