Adjusting The Volume From Your Cab-1 Or Cab-1L Remote - Lionel VISION Baggage Car Owner's Manual

LEGACY and Command Control Remote
Operations
Adjusting the volume from your CAB-1L, or CAB-1 remote
To adjust only the levels of the background sounds in CAB-1 or CAB-1L mode, such as bumping,
banging, metallic, or "ca-klunk" sounds:
1. Press ENG and enter the diner car ID.
2. Press AUX1 first, then press the volume up or down keys on your remote.
In this case, a metallic thwack sound will confirm the background or "blend" sound volume is being
adjusted. Again, this confirming sound will not be heard when the background/blend sound volume
reaches its minimum or maximum level.
Note!
To adjust the overall volume of the baggage car, follow the instructions above except do
not press AUX1. Only press the volume up or down buttons.
Note!
Be aware that if your Min/Max switch is in the Min position, adjusting the master volume
or blend volume from your remote will have essentially the same result.
17