Legacy Railsounds Sequence Control - Lionel VISION Baggage Car Owner's Manual

LEGACY and Command Control Remote
Operations

LEGACY RailSounds Sequence Control

Y
our LEGACY-equipped VISION baggage car features Sequence Control. Based on the movement
and speed of the head-end locomotive, Sequence Control automatically plays the FreightSounds
effects of an entire trip, from departure to destination, while you run your train. Prototypical whistle
signals, bell, and radio chatter are added automatically as you spin your throttle—no need to
memorize a sequence of button presses.
To activate the Sequence Control feature, first make sure your VISION baggage car has been assigned
to be part of a Train.
Next, press and hold the AUX1 button for three seconds. You'll hear a unique bell/whistle signal from
the head-end locomotive, indicating that Sequence Control is now enabled. Release the AUX1 key
when you hear the sound. Now, FreightSounds announcements will play automatically as you move
the train. Plus, you can still activate announcements using your remote.
To discontinue Sequence Control, you must tap AUX1, and then tap the 0 key or the RESET button.
Cycling track power off and back on also turns of Sequence Control mode.
20