Table of Contents
Advertisement
LEGACY and Command Control Remote
Operations
Adjusting the volume from your LEGACY remote
I
n addition to the physical volume control under the hatch of your VISION Auxiliary Water Tender
(see page 5), your remote can be used to adjust the overall volume, or just the volume of the
background sounds (which include bump, grind, and rail clatter).
Pressing the volume up or down buttons (see pages 11 or 15) adjusts the overall volume of your
VISION Auxiliary Water Tender. A single bell ring will be heard each time the volume is raised or
lowered, except that no ring will be heard once the volume reaches the minimum or maximum
levels.
To adjust only the levels of the background sounds in LEGACY mode, such as rail clatter, bump and
grind sounds:
1. If assigned to a Train, press Train Link, or address your tender directly by pressing ENG and its
ID.
2. Press AUX1 first, then press the volume up or down keys on your remote.
3. Press the Train Link button to continue controlling your train.
In this case, a metallic clank sound will confirm the background or "blend" sound volume is being
adjusted. Again, this confirming sound will not be heard when the background/blend sound volume
reaches its minimum or maximum level.
Note!
To adjust the overall volume of the tender, follow the instructions above except do not
press AUX1. Only press the volume up or down buttons.
Note!
Be aware that if your Min/Max switch is in the Min position, adjusting the master volume
or blend volume from your remote will have essentially the same result.
Adjusting the volume from your CAB-1L, or CAB-1 remote
To adjust only the levels of the background sounds in CAB-1 or CAB-1L mode, such as rail clatter,
bump and grind sounds:
1. Press ENG and enter the Auxiliary Water Tender ID.
2. Press AUX1 first, then press the volume up or down keys on your remote.
In this case, a metallic clank sound will confirm the background or "blend" sound volume is being
adjusted. Again, this confirming sound will not be heard when the background/blend sound volume
reaches its minimum or maximum level.
Note!
To adjust the overall volume of the tender, follow the instructions above except do not
press AUX1. Only press the volume up or down buttons.
Note!
Be aware that if your Min/Max switch is in the Min position, adjusting the master volume
or blend volume from your remote will have essentially the same result.
16
Advertisement
Table of Contents
