Adjusting The Locomotive Volume Using The Universal Remote - Lionel GP35 Diesel Locomotive Owner's Manual

Using the LionChief Universal Remote
Adjusting the locomotive volume with the Universal Remote
T
o adjust the overall volume of the locomotive's sound system begin by placing the throttle
in the top dead center position (so the red LED is solidly illuminated and the locomotive is
stopped). Press and hold the Announcement button then turn the throttle to the left and / or right,
this will increase and decrease the overall locomotive volume. Continue holding the Announcement
button when turning the throttle, you can stay in this mode until the volume is at the level you
desire. Once the volume level is set to the level you want release the Announcement button and
return the locomotive throttle to the top dead center position again. (The new volume level will
remain until you change it in the future, even after power has been cycled.) If, after running the
locomotive, you decide to change the volume, simply follow the steps above to do so.
If the throttle is not in the top dead center position before or after the volume
Note!
adjustment process undesired operation will occur. Always start and finish the
volume adjustment process with the throttle in the top dead center position!
26