Draining A System - ATC G04 Series Installation, Operation & Service Manual

Table of Contents

Advertisement

Applied Thermal Control Ltd
39 Hayhill Industrial Estate
Barrow-upon-Soar, Loughborough
LE12 8LD, United Kingdom
+44 (0) 1530 839 998
Service@thermalexchange.co.uk
Support@app-therm.com
4.5

DRAINING A SYSTEM

a) Isolate the unit. Have a suitable bucket or drain on-hand.
i)
Remove the tank lid to allow air into the system.
ii) Disconnect hoses individually. Be aware hoses as well as the unit are filled with fluid.
iii) Use tank drain tap (If fitted)
iv) Consider using the red transport plugs to block product ports to give yourself time to
empty hoses before continuing to empty the product.
b) Local rules affect where fluid can be disposed of.
Ensure hazardous products do not enter the water course and are reclaimed from the unit for
professional disposal.
Installation, Operation & Service Manual
G04/K04
Rev 1 – 05/04/23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G04 Series and is the answer not in the manual?

This manual is also suitable for:

K04 series

Table of Contents