26
Maintenance
1
Fig. 6: Adjust modular belt chainAdjust modular belt chain
Quick installation guide_Conveyor system MB-flex S Al_20221114_EN.docx
Remove fastening clip as follows:
4. Press the blue locking pin (1) upwards and remove.
1
5. Pull the yellow tab out.
6. Pull out connecting rod.
7. Draw out opened chain.
8. Insert new chain or replace damaged chain links.
9. Reinsert the connecting rod.
Insert fastening clip as follows:
10. Insert the yellow tab (1) with the foot pointing
11. Subsequently press the blue closure PIN (2) from
12. Reattach and fasten the side parts.
2
✓
downwards into the lateral chain opening.
above into the opening over the tab until the PIN
latches into place.
Ready.