Table of Contents
Advertisement
5.2
Maintenance plan
Regular maintenance and care are required for the operational safety and fault-free operation of the
system. The specifications in the maintenance plan are guide values and must be adjusted by the
owner depending on the operating conditions.
ATTENTION
Warning of material damage due to non-original spare parts!
Use of non-original spare parts can lead to defects in the conveyance goods, operational
malfunctions, loss of safety functions and damage to or destruction of components.
»
Only replace components with original spare parts from euroflex GmbH.
General
Assembly and maintenance work
Inspect the conveyor system for visible damage, noise
and vibration
Safety and protective
devices
Operating and display
elements (buttons,
switches, indicator lamps,
manometers)
Signage
Check fixing elements, retighten if required
Check the supply lines and connections for leakage
Electrical connections
Adhere to lubrication schedule
Clean conveyor system
Quick installation guide_Conveyor system MB-flex O Al_20221114_EN.docx
Check for completeness and
function
Replace defective equipment
Check functionality
Replace defective
components
Check legibility and
completeness
Clean or replace, if required
Check for damage and firm
seating
Replace defective connections Replace if required
Maintenance
Interval [Bh]
Personnel
8 (per shift)
Operating personnel
8 (per shift)
Operating personnel
Replace if required
Maintenance personnel
24 (daily)
Operating personnel
Replace if required
Maintenance personnel
24 (daily)
Operating personnel
Replace if required
1.000 (quarterly)
Maintenance personnel
after the first 20
Maintenance personnel
24 (daily)
24 (daily)
Electricians
"Lubrication schedule"
Maintenance personnel
(Page 20)
24 (daily)
Operating personnel
21
Advertisement
Table of Contents
