Table of Contents
Advertisement
Maintenance
5
This chapter provides information on the maintenance work to be carried out:
▪
Lubrication (Page 20)
▪
Maintenance plan (Page 21)
▪
Maintenance log (Page 23)
▪
Repair (Page 23)
5.1
Lubrication
Incorrect or negligent use of hazardous substances may lead to serious environmental pollution.
Observe the following:
▪
Apply lubricant evenly and sparingly at the specified points.
▪
Carefully remove any escaping, used or excess lubricant.
▪
Deal with solvents and cleaning agents in accordance with the manufacturer's safety data
sheet.
▪
Dispose of all hazardous substances in accordance with the regional guidelines and
commission a specialist company if required.
Malfunctions and excessive levels of wear on individual components are likely to result from the use
of operating substances that cause significant pollution and/or that fail to comply with the stipulated
specification. Warranty claims that can be traced back to this content shall be rejected.
Observe the following:
▪
Use operating substances with the specified purity class.
▪
Check the state of the operating substance at regular intervals.
Lubrication schedule
Designation
No.
Name
1
Roller chain (Drive)
Drive station,
Deflection,
2
Sliding bend,
Bending wheel
3
Gear motor (Drive motor)
Quick installation guide_Conveyor system MB-flex O Al_20221114_EN.docx
Note
Interval [Bh]
Spray!
after each cleaning
Spray!
after each cleaning
Details on lubrication and maintenance see manufacturer of the
gearmotor
Maintenance
Lubricant
250 also
Chain Lubricant Spray
NSF H1
250 also
Silicone spray
NSF H1
20
Advertisement
Table of Contents
