Table of Contents
Advertisement
5. Back off, but don't remove, the plastic wing knob
(15). As you back the knobs off, hold the bagger
frame and let it tilt back. Back the wing knobs off
unit until they are flush with the end of the weld
stud, keep the threads fully engaged. With the
bagger frame tilted back, access to the filter is
allowed.
6. Reverse steps for installation.
STORAGE
WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
IMPORTANT: NEVER spray unit with high-pressure
water. DO NOT store unit outdoors.
Clean plastic surfaces with sponge and mild detergent.
Dry with a soft cloth.
Clear away debris under belt cover, in boot assembly, in
tube, and in cover assembly before storing.
Remove all dirt, grease, leaves, etc. from unit.
Store in a clean, dry area.
Ensure all fasteners are properly tightened. Inspect
moving parts for damage and wear.
Touch up all rusted or chipped painted surfaces.
TROUBLESHOOTING
Problem
Probable Cause
1. Air flow is
restricted.
Airflow
indicator
points
straight
up.
1. The grass bagger
baskets are full.
Bagger
fails to
pick up
grass or
2. Bagger is
leaves.
clogged.
Correction
1. The grass bagger
baskets are full
(see Emptying
Mesh Bags on
page 16).
2. The bagger is
clogged (see
Unclogging
Bagger
on
page 17).
1. Empty grass
bagger baskets
(see Emptying
Mesh Bags on
page 16).
2. Unclog bagger
(see Unclogging
Bagger on
page 17).
18
SPECIFICATIONS
Model Number
Description
Serial Number
Added Length to Unit
Added Weight to Unit
For Use on Models
Model Number
Description
Serial Number
Added Length to Unit
Added Weight to Unit
For Use on Models
815037
Non-Powered Bagger
000101 and up
19 5/8" (49.8 cm)
129 lb. (58.5 kg)
915146 915168
915157 915169
815038
Non-Powered Bagger
000101 and up
19 5/8" (49.8 cm)
129 lb. (58.5 kg)
915148 915150
915159 915161
915170 915171
Advertisement
Table of Contents
