Ariens GRAVELY Zoom & ZT Bagger Operator's & Parts Manual page 14

INSTALL BAG ON FRAME (FIGURE 16)
1. Thread the bag frames (9) through the sleeve on
the open end of the mesh bag (3).
2. Install the 3/8 x 1/2 x 3" plastic tubes (6) on the
ends of the bag frames (9) and push then ends
together. on the ends of the bag frame (8) and push
the ends together.
NOTE: The rope handle on the bottom of the bag will
point to the outside when the bag is assembled correctly.
Thread bag frame (9) through sleeve in
mesh bag (3).
Install 3/8 x 1/2 x 3" plastic tube (6) on
each end of frame and push the ends
together.
Figure 16
14