Ariens GRAVELY Zoom & ZT Bagger Operator's & Parts Manual page 12

INSTALLING BAGGER BOOT
(815038)
1. Remove and retain discharge chute and discharge
chute mount strap (figure 11). Retain all hardware.
Remove and
retain discharge
chute and
discharge chute
mount bracket.
2. Remove and retain one nut from baffle bracket on
top side of deck. Right nut for 50" decks or left nut
for 42" decks. See Figure 12.
Remove and save
for 42" decks.
Figure 12
3. Install the boot mount strap weldment (27) on the
deck with two .31-18 locking center nuts (29). See
Figure 13.
Figure 11
Remove and save
for 50" decks.
28
30
4. Install the bagger boot on the deck with three
.312-18 nyloc wing nuts (28) and one .406 x .812 x
.065 flat steel washer (30). See Figure 13 and
Figure 14.
30
27
12
28
6
29
27
Figure 13
28
29
Figure 14