Active Speaker Tube & Base; Tower Rigging System Plates; Sub Pole Cup - 1 Sound LCC44 Manual

STACKED AND POLE-MOUNTED DEPLOYMENTS OF THE TOWER SYSTEM
Active Speaker Tube & Base
Free-standing Speaker Stand for LCC44 with Round Steel Base
Figure 10. Active Speaker Tube & Base
The Active Speaker Tube & Base is an elegant speaker stand 176
cm tall (≈69"), made of square-section steel on a stable, round steel
base 50 cm (≈20") in diameter. This accessory incorporates a Speakon
NL4 connector at each end, to avoid unsightly and precarious cable
connections and achieve a sleek, clean look. It is available with a black
or white finish.
The kit includes:
•
The fully assembled Active Speaker Tube
•
The steel base

Tower Rigging System Plates

Figure 11. Tower Rigging System plates
The Tower Rigging System plates are machined from solid blocks of
structural aluminum. This system is used to attach a Tower loudspeaker
to either another Tower column, a subwoofer or a fly bar. It can also
be used with the Tower Tube Mount to allow variable divergent or
convergent splay angles. The plates are available with an anodized black
or silver finish.
The kit includes:
•
2 × Rigging Plates
•
2 × stainless steel M10x100 ball-lock pins
•
8 × M6×50 mm stainless steel countersunk socket-head screws
(4 mm Allen)
•
4 × M6×45 mm stainless steel countersunk socket-head screws
(4 mm Allen)

Sub Pole Cup

Square adapter for subwoofer M20 flange to Active Speaker Tube
Figure 12. Sub Pole Cup
The Sub Pole Cup is made from 4 mm steel and fits in various 1 SOUND
subwoofers in order to mount a satellite speaker enclosure. It couples
with all 1 SOUND Active Speaker Tubes, as well as standard round poles
that have a M20 screw-in bolt. It is available with a black or white finish.
The kit includes:
•
Sub Pole Cup
•
Gasket (pre-installed on the Sub Pole Cup)