Table of Contents
Advertisement
Chapter 2. Accessories
Active Speaker Tubes
For mounting LCC44/84 as satellites on SUB310/CSUB610/CSUB210/
SUB12
Figure 7. Active Speaker tubes: 145 cm and 95 cm.
The Active Speaker Tubes are steel square-section speaker poles
available in lengths of 145 cm (≈57") and 95 cm (≈37.4"). These are used
to mount satellite speaker enclosures atop subwoofers, and incorporate
a Speakon NL4 connector at each end, to avoid unsightly and precarious
cable connections and achieve a sleek, clean look. They are available
with a black or white finish.
The kit includes:
•
The fully assembled Active Speaker Tube
Passive 40 cm Speaker Tube
For mounting LCC44/84 as satellites on SUB310/CSUB610/CSUB210/
SUB12
Figure 8. The 40 cm (16 in) Speaker Tube.
The 40 cm (≈16") Speaker Tube is a simple steel square-section speaker
pole for mounting satellite speaker enclosures atop subwoofers. It is
available with a black or white finish.
The kit includes:
•
The Speaker Tube
Tower Tube Mount
Figure 9. Tower Tube Mount
The Tower Tube Mount enables a Tower loudspeaker to be coupled with
the proprietary Active Speaker Tubes for deployment of LCC44 or LCC84
cardioid column line array enclosures on a free-standing base or atop a
SUB310 or CSUB610 subwoofer. The mount attaches either directly the
to the speaker enclosure for a 0° vertical angle or to the Tower Rigging
System to enable the angle to be adjusted to -3°, 0° or +3°. The Tower
Tube Mount is made of galvanized, zinc plated and black or white powder
coated steel.
The kit includes:
•
The Tower Tube Mount
•
2 x M6x12 mm flat head socket screws for use with the Tower
Rigging System rigging plate
Advertisement
Table of Contents
