Download Print this page
ElectrIQ EAP100D User Manual

ElectrIQ EAP100D User Manual

Ultra quiet air purifier with room temperature and humidity display three stage filtration technology hepa / activated carbon / plasma ioniser
Hide thumbs Also See for EAP100D:

Advertisement

EAP100D Ultra Quiet Air Purifier
with room temperature and humidity display
three stage filtration technology
HEPA / activated carbon / plasma ioniser
USER MANUAL
Thank you for choosing this innovative ElectriQ Air Purifier.
Please read this user manual before using the product and
keep it safe for future reference.
Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals
1

Advertisement

loading

Summary of Contents for ElectrIQ EAP100D

  • Page 1 HEPA / activated carbon / plasma ioniser USER MANUAL Thank you for choosing this innovative ElectriQ Air Purifier. Please read this user manual before using the product and keep it safe for future reference. Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals...
  • Page 2: Table Of Contents

    CONTENTS 1.SAFETY INSTRUCTIONS 2.INDOOR POLUANTS 4.FILTER INSTALLATION 5.CONTROL AND SETTINGS 6.OPERATION 7. CARE AND MAINTENANCE 8.TROUBLESHOOTING...
  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS Important!  Carefully read the instructions before operating the unit  This appliance is for indoor use only.  Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet.  Installation must be in accordance with regulations of the country where the unit is used. ...
  • Page 4: Indoor Poluants

    Plasma Ioniser will sterilise the air and reduce bacterial growth. The antibacterial activated carbon in the EAP100D is a natural material biosynthesized from walnut shell, the adsorption area of activated carbon is very large up to 300,000 square meters. The activated carbon filter will absorb unpleasant odours and reduce the VOC content in the air.
  • Page 5: Filter Installation

    Operation Instructions Before first use Installing or replacing the Filters Note: for convenience HEPA and activated carbon filter are combined in one easy replaceable filter cartridge. High performance filters are not washable, keep them dry at all times and vacuum regularly.) Unplug the unit from the socket.
  • Page 6: Control And Settings

    Diagram of the Air Purifier Clean air outlet Filter cover HEPA and activated carbon cartridge Power cord connector Air inlet Power cord and power adapter Controls and Settings Temperature Humidity Display Fan speed Filter status Plasma ioniser Fan speed control Power on / of...
  • Page 7: Operation

    Operation Plug in the unit with the filter cartridge installed and press the Power On / Off button to turn the unit on. The air purifier will display the room temperature, fan mode and the filter status. The 2 digits led screen is able to display both room temperature and humidity.
  • Page 8: Care And Maintenance

    Note: do not assemble the unit and power it before all the parts are completely dry. Any other maintenance than what is described in this user manual must be only performed by the service centre. Technical Data Model EAP100D Fan Speed Medium High...
  • Page 9: Troubleshooting

    Air inlet or outlets may be blocked. Remove obstruction and try again. If this fails contact ElectrIQ support centre APPENDIX Disposal: Do not dispose this product as unsorted waste. Collection of such waste must be handled separately as special treatment is necessary.