Special Features - Ecco Vantage 12+ Series Installation & Operation Instructions

"Safety Director On/Off" - Will resume pattern selected.
"Safety Director Pattern Select" - Press once to cycle to the next Safety Director flash pattern. There is a 5 second
"Forward Worklamp" - Will turn on forward facing worklamps.
"Rear Worklamp" - Will turn on rear facing worklamps.
"Alley Left" - Will turn on the left alley light.
"Alley Right" - Will turn on the right alley light.

Special Features:

Touchpad Backlight
Press and hold the "Day/Night" button to turn on the touchpad backlight
Safety Director Module Selection
Safety Director Front/Rear Selection
delay between the controller and the lightbar. Press and hold for 3 seconds to return
to the prior flash pattern. The lightbar will store the last flash pattern used.
To change the number of modules used in the safety director, press and hold
6 to 10 modules.
7 modules
Press to turn on the safety director.
Press and hold , once the corner LEDs light, tap
Example
to cycle front, rear or both.
- tap to select
9 modules