Operation - Ecco Vantage 12+ Series Installation & Operation Instructions

Stop / Tail / Turn LED Modules (EZ1205)
Stop Tail Turn modules operate in conjunction with the vehicle tail, brake and direction indicator
lights. Kit includes a pair of modules, control circuit and cable.

Operation

The 12+ series basic control pad consists of 7 buttons with 5 features, and 6 indicator windows. When a feature button is selected, the cor-
responding clear indicator(s) will illuminate. Pressing any of the 5 feature buttons will turn that corresponding feature on, pressing it again will
turn it off. There are two large flash pattern preset buttons; only one can be selected at a time. If one is on while the other is selected, it will
shut the previous one off. The "OFF and "SEL" buttons do not have illuminated indicators.
"OFF" - Turns the whole bar off. This is a quick way to shut everything down. Features can also be shut down individually by
pushing the feature's button.
"Power 1, Power 2" - Turns on the flash pattern presets.
"AL" - Turns on left alley light, or as custom configured.
"WL" - Turns on center pair of takedown and/or worklights, or as custom configured.
"AR" - Turns on right alley light, or as custom configured.
"SEL" -Double press to enter flash pattern select mode and cycle to the next flash pattern. Press again to cycle to the next
flash pattern. Press and hold for 3 seconds to return to the prior flash pattern. The lightbar will store the last flash
pattern used to the active preset.
Basic Control Pad (EZ0006)
The EZ0006 optional in-cab controller provides convenient control of the lightbar's
built-in flash patterns and features soft touch buttons and LED function indicator
lights.