Ecco Vantage 12+ Series Installation & Operation Instructions page 15

Operation
The 12+ series advanced control pad consists of 11 buttons.
"Power" - Press to cycle through three programmable flash pattern presets. Hold button down to shut down all functions.
Press again to resume as before.
"Cruise" - Press to illuminate all directional modules in steady burn mode.
"Day/Night Mode" - Press to backlight the keypad and lower the brightness of the directional modules in the lightbar.
"Auxiliary Output" - For use with the auxiliary output from the junction box to a relay (customer supplied), to control
any auxiliary device via the junction box controlled relay.
"Flash Pattern Select" - Double press to enter flash pattern select mode and cycle one flash pattern. The 4 corner LEDs
Corner LED
Advanced Control Pad (EZ1202)
The EZ1202 optional in-cab advanced control pad provides convenient control of
the lightbar's built-in flash patterns and features soft touch buttons and LED func-
tion indicator lights.
Off Preset 1
on the controller will mimic the lightbar to give pattern feedback. Press again once to cycle to the
next flash pattern. Press and hold for 3 seconds to return to the prior flash pattern. The lightbar
will store the last flash pattern used to the active preset.
Preset 2 Preset 3