CARE AND CLEANING
COOKTOP CONTROLS
1.
Remove knobs.
Pull the knobs straight away from the control panel to remove.
2.
Clean with warm, soapy water.
Know Your Cooktop Controls
To avoid damage to the cooktop controls, do not use steel
■
wool, abrasive cleansers, or oven cleaner.
To avoid damage, do not soak knobs.
■
When replacing knobs, make sure knobs are in the Off
■
position.
Do not remove seals under knobs.
■
When replacing knobs after cleaning either the surface burner
■
controls or the griddle module control, make sure the knobs
are replaced to the correct location. The power burner knobs
have power settings, and the griddle knob has temperature
settings. All other knobs have HI, MED, and LO settings only.
STAINLESS STEEL
(on some models)
Use cleaner or wipes.
Use affresh
Stainless Steel Cleaner or affresh
®
Cleaning Wipes (not included). Rub in direction of grain to
avoid possible damage to the steel surface.
Do Not Use:
Soap-filled scouring pads
■
Abrasive cleaners
■
Cooktop polishing creme
■
Steel-wool pads
■
Gritty washcloths
■
Abrasive paper towels
■
30
CONTROL PANEL
1.
Locking buttons avoids touch screen activation during cleaning.
2.
Apply glass cleaner to soft cloth or sponge, not directly
on panel, or use affresh
(not included).
Do Not Use:
Abrasive cleaners
■
Steel-wool pads
■
Gritty washcloths
■
Abrasive paper towels
■
DOOR EXTERIOR
Apply cleaner.
Apply glass cleaner to soft cloth or sponge, not directly
on panel, or use affresh
(not included).
Stainless Steel
®
Activate LOCK BUTTONS NOW.
Back
Setup Menu
Lock Buttons Now
Automatic Lock
Self-clean
Sound Volume
Set Time
Set Date
Cancel Left
Kitchen Timer
Apply cleaner.
Kitchen and Appliance Cleaner
®
Kitchen and Appliance Cleaner
®
Light
Cancel Right