Jenn-Air PRO-STYLE JGRP430HM Use And Care Manual page 34

CARE AND CLEANING
To Replace Oven Bake Burner Cover:
1.
Align notches.
A
1
Cover notches (4)
1
Shoulder screws (4)
2
Align the notches on the oven bake burner cover with the
shoulder screws in the bottom of the oven.
2.
Replace burner cover.
A
1
Bake burner cover
1
Lower the cover, and slide it to the left or right. This will slide
the shoulder screws into the narrow ends of the notches
and lock the cover in place.
3.
Replace oven door.
See the "Oven Door" section
in Installation Instructions.
To Remove Oven Bake Burner Cover
(left oven cavity on 48" [121.9 cm] models):
1.
Remove oven racks.
34
B B
2
2
2.
Remove oven door.
See the "Oven Door" section
in Installation Instructions.
1
A
3.
Remove burner cover.
A
1
Slide the bake burner cover to the right or left, lift up,
and remove.
To Replace Oven Bake Burner Cover:
1.
Align holes.
Rear shoulder screw mounting holes
1
(keyholes)
Shoulder screws
2
Align the rear shoulder screw mounting holes (keyholes)
on the oven bake burner cover with the shoulder screws
in the bottom of the oven.
Bake burner cover
1
A
1
B
2