Jenn-Air PRO-STYLE JGRP430HM Use And Care Manual page 15

Making Touchscreen Calibrations
IMPORTANT: If the keypads on the screen are difficult to touch
accurately, you may need to calibrate the touchscreen.
1.
Touch TOUCHSCREEN CALIBRATION.
Back Setup Menu
Touchscreen Calibration
Reset All Settings
2. Cancel Left Kitchen Timer
Touch NEXT.
Back Touchscreen Calibration
If buttons on the screen are difficult to press accurately, you may need to calibrate the touchscreen.
You will be asked to press and hold three targets to calibrate.
Cancel Left
Kitchen Timer
3.
Choose targets to calibrate.
Touch & hold center:
Target 1
Cancel Left
Kitchen Timer
Target 2
Cancel Left
Kitchen Timer
Target 3
Cancel Left Kitchen Timer
Touch, hold, and release 3 different targets to calibrate. Touch
targets again within 10 seconds. If calibration fails, the process
will restart at Step 2.
4.
Test calibration.
Test calibration by moving the circle around the screen. Ensure you can reach
all the corners.
Try Again
Test calibration by moving the circle around the screen.
Cancel Left Kitchen Timer
Ensure you can reach all the corners. Touch TRY AGAIN
to run calibration again or touch SAVE to save the setting.
NOTE: If the Cancel keypad is touched, the Touchscreen
Calibration will be canceled.
Temperature Calibration
Service Information
Light Cancel Right
Cancel Next >
Light Cancel Right
Touch & hold center:
Light
Cancel Right
Light Cancel Right
Touch & hold center:
Light Cancel Right
Cancel Save
Light Cancel Right
USING YOUR OVEN
Resetting All Settings to Factory Defaults
1.
Touch RESET ALL SETTINGS.
Back Setup Menu
Touchscreen Calibration
Reset All Settings
Cancel Left
Kitchen Timer
2.
Touch RESET or CANCEL.
Back Reset all settings to factory defaults?
The following settings will be lost:
- Most used modes
- My Creations
- Date/Time
- Lanuage
The Welcome Guide will appear to help you reset these.
Reset
If Reset is touched, the following settings will be lost: most-
Cancel Left Kitchen Timer
used modes, My Creations, Date/Time, Temperature Units,
and Language. You will be returned to the Welcome Guide
to reset settings.
Getting Service Information
1.
Touch SERVICE INFORMATION.
Back Setup Menu
Touchscreen Calibration
Reset All Settings
Cancel Left Kitchen Timer
2.
Choose Demo mode setting, and then
touch SAVE.
Back Service information:
For help with your product, consult:
- The Use and Care Manual
-ww.JennAir.com/service
- 1-800-Jenn-Air
Cancel Left
Kitchen Timer
Choose ON or OFF for Demo mode.
IMPORTANT: This feature is intended for use on the sales floor
with 120V power connection and permits the control features
to be demonstrated without heating elements turning on. If this
feature is activated, the oven will not work.
NOTE: If CANCEL is touched, the Service Information will go
back to the default setting.
Temperature Calibration
Service Information
Light
Cancel Right
Cancel
Light Cancel Right
Temperature Calibration
Service Information
Light Cancel Right
Store-Aisle Demo Mode
(heating will be disabled)
Demo Mode: Off
Cancel Save
Light Cancel Right
15