Table of Contents
Advertisement
Solution 6000-IP
User Guide
Copyright Notice
Unless otherwise indicated, this publication is the copyright
of Bosch Security Systems Pty Ltd ("Bosch"). All rights are
reserved.You may download a single copy of this publication.
By downloading the publication you agree that you will: (i) only
use the publication for your own reference; (ii) not commercially
exploit or charge any person for the use of the publication;
and (iii) not modify the publication in any way without the
prior written permission of Bosch. Except as specified above or
where authorised by the Copyright Act 1968 (Cth), no part of
this publication may be reproduced, transmitted, modified or
stored in any form or by any means, without the prior written
permission of Bosch.
Trademarks
Throughout this document trademark names may have been
used. Rather than put a trademark symbol in every occurrence
of a trademark name, we state that we are using the names only
in an editorial fashion and to the benefit of the trademark owner
with no intention of infringement of the trademark.
Notice of Liability
While every effort has been taken the accuracy of this document,
neither Bosch Security Systems Pty Ltd nor any of its official
representatives shall have any liability to any person or entity
with respect to any liability, loss or damage caused or alleged
to be caused directly or indirectly by the information contained
in this book. Should you find any error on inconsistency, please
notify us accordingly.
Bosch Security Systems Pty Ltd reserves the right to make
changes to features and specifications at any time without prior
notification in the interest of ongoing product development and
improvement.
Thankyou for selecting the Solution 6000-IP Security Control Panel for your security needs. Your system includes many advanced
features and functions which will be programmed and configured by your security consultant during installation. Depending on the
configuration, and your access level, you may have the ability to program certain features within the system to suit changes in your
security needs. For example you may wish to change a User Name or PIN number when a staff member leaves.
This manual explains all aspects of system operation as well as detailling the various programming options available to you. We ask that
you take the time to read this manual carefully and that you have your installer explain the basic system operation and configuration
to you when the installation is complete.
2
Warnings
1) This product must be installed by a qualified and
licensed security installer.
2) This product may not perform as expected if
installed incorrectly.
3) Some features of this product, including but
not limited to MyAlarm Back to Base reporting,
MyAlarm SMS, MyAlarm Email Reporting,
MyAlarm Voice Reporting , MyAlarm Push
Reporting and Automatic Time and Date
Adjustments require a working IP connection to
operate.
4) Australian standard AS 2201 requires regular
service by qualified and licensed security persons
and regular user testing. Please consult your
security alarm company for further details.
5) Incorrect programming of parameters can result
in operation contrary to what may be desired.
6) Leave the mains adapter plugged in at all times.
7) Leave IP connected in at all times under normal
conditions.
8) The Product Identification Label for this product
which is supplied in the resistor pack, must be
affixed to the outside of the enclosure during
installation.
9) This equipment shall not be set up to make
automatic calls to the Telecom '111' Emergency
Service.
Notice to O wn e r
S o l u t i o n 6 0 0 0 - I P
Intrusion Control Panel
RoHS
Bosch Security Systems 10/22 BLCC615U
De signed In
Aust ra lia
Advertisement
Table of Contents
