Advertisement
STEP 4: TO INSTALL BALLAST TRAYS. FIND THE TRAY LABELED CANOPY AND
INSTALL IT ON THE LEFT SIDE. THE BENCH TRAY INSTALLS ON THE
RIGHT SIDE.
STEP 5: FIND RH-LH BLOWER CORD AND BODY FAN CORD IN LEG ASSEMBLY
AND ATTACH TO CPC CONNECTION ON FRONT OF BALLAST TRAY.
STEP 6: INSTALL PLASTIC AIR COLLECTOR USING #8 X 5/8 PHILIPS TECH
SCREW.
STEP 7: REMOVE ALL THREE ACCESS PANEL ON BACK OF LEG ASSEMBLY.
STEP 8: REMOVE CAM RETAINING BOLT.
STEP 9: CUT PLASTIC TIE RETAINING CHAIN TO
GEAR INSIDE RH-LH ASSEMBLY.
STEP 10: INSTALL CANOPY. TO DO THIS, POSITION CANOPY ON TABS ON THE
END OF THE LEG ASSEMBLY. THE CANOPY WILL STAY IN PLACE
AFTER IT IS HINGED.
www.heartlandtan.com
21
11/05
Advertisement
