E-Mail Server Setup - Pharos PTL600 Hardware User Manual

Refer to this section if you are preparing for single-machine use and not combining
office and home E-mails. If you already have an E-mail account from your ISP or
company network, you can use Messaging to send and receive mails and messages.
To establish a new Messaging E-mail server on your GPS Phone 600, refer to the
following sections.
1. Obtain the following information from your ISP or company's network administrator
for convenience in setting up the E-mail service.
♦ E-mail address, account name and password.
♦ POP3 or IMAP4 server name for internal mail.
♦ SMTP server name for sending mail.
For AT&T / Cingular, use cwmx.com as the outgoing mail server.
Tap Menu, Tools and then Options to change the E-mail setup.

E-mail Server Setup

2. E-mail Setup
♦ Tap
Start, Messaging, Menu, Tools, and
then New Account to display the screen on the
left.
♦ Follow the screen instructions to set up the
E-mail service.
3. Refer to "Connecting to the Internet" section to
connect the GPS Phone 600 to the Internet and you
can start sending and receiving E-mails and SMS
messages.
4. Connecting to the E-mail server
♦ Tap Messaging, Menu, Switch Accounts, and
then check POP3.
♦ Tap Menu and then Send / Receive.
87