Chapter 3: Using The Gps Phone; Start Screen - Pharos PTL600 Hardware User Manual

Pharos ptl600: user guide

Table of Contents

Tap

Start, Settings, the System tab, and then Screen.

The first time you use or cold boot the GPS Phone 600, the system will ask you to align

the screen. Continue to tap the center of each cross (+) that appears and follow the

screen instructions to complete the operation. If you feel that the position is not quite

accurate while tapping on the screen, you can align the screen again at any time.

If you are unable to use the stylus, use the following steps to open the touch screen

calibration mode.

1. Simultaneously press the Left Soft-Key on the bottom-left of the GPS Phone

600 and the execution button in the center of the navigation pad.

2. Release these two buttons at the same time, and you will enter the calibration

screen.

Chapter 3

Using the GPS Phone 600

1. Orientation:

♦ Portrait (default)

♦ Landscape (right-handed)

♦ Landscape (left-handed)

2. Tap the Align Screen button to calibrate the

screen. When Align Screen appears, use the

stylus to tap the center of the cross (+) until

the next cross appears, and then follow the

screen instructions to complete the

operation. Finally, tap

3. Text Size tab:

For selecting the desired text size.

to exit.

Table of Contents

Gps phone 600 series