Table of Contents
Advertisement
4.
Cold Boot: Press and hold the "Power Button" with one hand, and use the stylus
tip to press the "Reset Button" with the other hand. Release the "Power Button"
and the "Reset Button" at the same time. Wait for the GPS Phone 600 to restart
and follow the instructions on the screen to complete screen alignment.
5.
It will take about 8 hours to fully charge the battery the first time. Subsequent
charging will only take about 3 hours. After charging, you can disconnect the AC
Adapter and carry the GPS Phone 600 with you. To maintain reliable operation
charge the power regularly. View the battery icon on the upper right corner to
check the power usage condition.
6.
The LED indicator on the upper left of the GPS Phone 600 displays the WLAN,
Bluetooth and GPS status.
WLAN Active
Orange L E D flashes Blue LED blinks once
7.
The LED indicator on the upper right of the GPS Phone 600 indicates the
charging status, cell phone status, and notices.
Charging
Red L E D lights up
Phone is on
Green L E D flashes
Bluetooth Active
every 4 seconds
Fully charged
Red LED goes off
Green LED lights up
Caution or Warning
Orange L E D flashes
17
GPS Active
Blue L E D blinks twice
every 4 seconds
Insufficient power
Red LED flashes
Advertisement
Table of Contents
