Table of Contents
Advertisement
4. My GPS Phone 600 has a screen freeze or the system does not respond.
What should I do about it?
Answer:
1). You may reset your GPS Phone 600. This means to re-start the whole system to
release unnecessary resources so that the system can return to normal.
2). If you have reset your GPS Phone 600 but it still cannot operate normally, then
you need to carry out a cold boot to solve this problem. How to carry out a cold
boot: Press and hold the "Power Button" with one hand, and use the stylus tip to
press the "Reset Button" with the other hand. Release the "Power Button" and
the "Reset Button" at the same time. If you answer "Yes" to the two questions
displayed after a cold boot. (Erase all data and load default? Delete registry
only?) The programs installed by yourself, self-made settings, and self-made
data (e.g., "Contacts" and "Calendar") will disappear and return to their default
settings. As a result, we suggest you copy your data to the storage card. Data
stored in the storage card will not vanish because of a cold boot. Or you can
synchronize the data on your GPS Phone 600 with your desktop computer.
5. Why doesn't my GPS Phone 600 make any sound?
Answer:
1). Tap the speaker icon
control options, or adjust the volume of the incoming call sound.
2). Alternatively, you may use the volume control key on the side of your GPS
Phone 600 by pushing it up or down to control the volume.
6. Why does my GPS Phone 600 screen automatically become dark?
Answer:
Tap
Start, Settings, the System tab, Backlight, and then the Battery Power or
the External Power tab. You may find that if you use battery power, the backlight
automatically shuts down after 30 seconds by default; the external power shuts
down after 1 minute by default. If you think these times are too short, you may
extend them as needed.
7. When I want to open a program or file, a warning message "Not enough memory"
pops up. What should I do about it?
Answer:
Because your GPS Phone 600's memory is shared by storage memory and program
memory, the following methods are available. You may choose the one that works
best for you.
1). Remove the programs you installed or that are not frequently used to release
program memory space.
2). Delete data that is not used frequently or unnecessary to release storage
memory space.
on the top right of the screen, then select the volume
146
Advertisement
Table of Contents
