Adjusting The Phone Volume - Pharos PTL600 Hardware User Manual

♦ Vibration mode: The speaker icon
♦ Mute mode: The speaker icon
Adjusting for proper volume:
If earphones are used with the GPS Phone 600 to make calls, set the volume according
to your personal needs.
1. If you are not using earphones, you can set the volume to the top two levels for
hands-free operation.
2. For holding the GPS Phone 600 close to the ear directly for calls, set the volume to
the lower four levels. It is recommended not to use the top two levels because the
volume is high and may affect your hearing.
Turn on / off the speakerphone:
1. Enable the speakerphone: While answering a call, tap Speaker on to turn on.
2. Disable the speakerphone: Tap Speaker off to turn off.

Adjusting the Phone Volume

Tap on the top and adjust all programs' sound
functions under
under
.
When there is no call, you can push the volume
control key on the side of the GPS Phone 600 or
use the stylus to tap the speaker icon. Tap
then to adjust the ring volume of the incoming
call.
Push the volume control key on the side of the GPS
Phone 600 or tap
phone volume. You can only do this during a call.
on the top changes to
43
. Adjust the phone sound volume
and then
on the top changes to
and
to adjust the
.
.