Pharos PTL600 Hardware User Manual page 82

Select the icon on the bottom right of the Today screen or Tap
and then Wireless Manager.
.
1. This icon will show up on your screen whenever your
GPS Phone 600 has detected a usable wireless network
and has connected to that network, indicating that your
GPS Phone 600 has successfully connected to the
network hotspot (Access Point). At this point, the
indicator on the upper left of your GPS Phone 600 will
flash orange.
2. Tap to enter the setup screen.
3. Tap to connect or disconnect to your wireless network, a
means that this function has been disabled.
When the screen shown on the left appears, please choose
a wireless network that you can use, and then tap OK
button. Then, select Work, and tap Connect button.
The first time you use the wireless LAN function, your
system will ask you to set the above mentioned settings,
after that, your system will continue to use the settings from
your most recent successful connection
79
Start, Programs