Table of Contents
Advertisement
8.3 Configure Your Wireless Network
(Reference for Proxy setup)
To successfully configure your network, you will need the following information: a
correct IP address, DNS name server address, Proxy server, and connection port
number, etc. Please obtain the above listed information from your company's network
administrator. If your company's networking environment doesn't need Proxy server
settings, please close the proxy connection.
Tap
Start, Settings, the Connections tab, Connections, and then the Tasks tab.
The above is applicable to an office environment that requires a Proxy setup.
For networks that do not use a proxy server, skip the following procedures.
3. Enter the name into the "Proxy server" field.
4. Select the Advanced button and enter the advanced settings screen.
If your GPS Phone 600 fails to automatically detect or
connect to a usable wireless network, please try using the
manual method to configure your network settings. Refer
to the settings information in this section.
1. Select "Setup my proxy server" or" Edit my proxy
server," as shown on the left.
2. In the Proxy Settings tab screen, make sure that the
following items have been checked:
a. This network connects to the Internet
b. This network uses a proxy server to connect to the
Internet
82
Advertisement
Table of Contents
