ITech IT8500+ Series Manual page 18

th
4 byte
th
From 5 to 25 byte
th
26 byte
16. Set / Read the list repeat mode. (3CH/3DH)
st
1 byte
nd
2 byte
rd
3 byte
4 th byte
th th
From 5 to 25 byte
th
26 byte
17. Set / Read list step counts. (3EH/3FH)
st
1 byte
nd
2 byte
rd
3 byte
th th
From 4 byte to 5 byte
th th
From 6 to 25 byte
th
26 byte
18. Set / Read one of the step's current and time values. (40H/41H)
st
1 byte
nd
2 byte
rd
3 byte
th th
From 4 byte to 5 byte
From 6 th to 9 th byte
From 10 th to 11 th byte
th th
From 12 to 25 byte
th
26 byte
19. Save / Recall list file in appointed area.. (4CH/4DH)
st
1 byte
nd
2 byte
rd
3 byte
4 th byte
th th
From 5 to 25 byte
th
26 byte
20. Setting / Reading timer value of FOR LOAD ON (50H/51H）
st
1 byte
nd
2 byte
rd
3 byte
LIST operation mode（0 is CC mode）
System reserve
Sum code
Start bit ( AAH )
Address (0—31,0XFF)
Command（3CH/3DH）
LIST repeat operation mode(0 is ONCE, 1 is REPEAT,65535 represents no limit)
System reserve
Sum code
Start bit ( AAH )
Address (0—31,0XFF)
Command（3EH/3FH）
LIST steps count
System reserve
Sum code
Start bit ( AAH )
Address (0—31,0XFF)
Command（40H/41H）
Appointed one step
Current value of current step (Lower bytes are in the front location, higher bytes
are in the later location)
Time value of current step (Lower bytes are in the front location, higher bytes are
in the later location) (1 represent 0.1mS)
System reserve
Sum code
Start bit ( AAH )
Address (0—31,0XFF)
Command（4CH/4DH）
Storing area (1 ~ 7)
System reserve
Sum code
Start bit ( AAH )
Address (0—31,0XFF)
Command（50H/51H）
18