ITech IT8500+ Series Manual page 16

Represent power by 4 bytes of Hex. Lower bytes are in the front location, higher bytes are in
the later location. For example :power is 200.000W，Hex is 0X00030d40，4th byte is 0X40，
5th byte is 0X0d，6th byte is 0X03，7th byte is 0X00。
10. Set / Read resistance value CR mode（30H/31H）
st
1 byte
nd
2 byte
rd
3 byte
th
4 byte
th
5 byte
th
6 byte
th
7 byte
th th
8 to 25 byte
th
26 byte
NOTE
Represent resistance value by 4 bytes of Hex. Lower bytes are
in the front location, higher bytes are in the later location. If resistance value is 200.000R，Hex
code is 0X00030d40， 4TH byte is 0X40， 5TH byte is 0X0d， 6th byte is 0X03， 7th byte is 0X00。
11. Set / Read CC mode transient current and timer parameter. （32H/33H）
st
1 byte
nd
2 byte
rd
3 byte
th th
From 4 byte to 7 byte
th th
From 8 byte to 9 byte.
From 10 th to 13 th byte
th th
From 14 to 15 byte
th
16 byte
th th
From 17 to 25 byte
th
26 byte
12. Set / Read CV transient voltage and timer parameter.（34H/35H）
st
1 byte
2 nd byte
3 rd byte
th th
From 4 to 7 byte.
th
From 8 to 9th byte.
Start bit ( AAH )
Address (0—31,0XFF)
Command（30H/31H）
The lowest byte of resistance value.
The lower byte of resistance value.
The higher byte of resistance value.
The highest byte of resistance value.
System reserve
Sum code
Start bit ( AAH )
Address (0—31,0XFF)
Command（32H/33H）
Setting value of current A (Lower bytes are in the front location, higher bytes
are in the later location.)
Time value of timer A ((Lower bytes are in the front location, higher bytes are in
the later location) (1 represent 0.1mS)
Setting value of current B (Lower bytes are in the front location, higher bytes
are in the later location)
Time value of timer B (Lower bytes are in the front location, higher bytes are in
the later location) (1 represent 0.1mS)
Transition operation mode (0 is CONTINUES, 1 is PULSE, 2 is TOGGLED)
System reserve
Sum code
Start bit ( AAH )
Address (0—31,0XFF)
Command（34H/35H）
Setting value of voltage A (Lower bytes are in the front location, higher bytes
are in the later location)
Time value of timer A (Lower bytes are in the front location, higher bytes are in
the later location) (1represent 0.1mS)
16