Clearaudio Master I nnovation User Manual page 14

User manual
10.)
Take the stainless steel sub-platter from carton 3 and remove the protective packaging.
Place the platter with the small deepening showing down carefully onto the upper part of the
bearing. Make sure that the protective film is still fixed in place at this point.
Next, take the platter out of its box and set it carefully with the metal disc down onto the bearing.
Now you can carefully remove the protective film.
For this purpose press the platter slightly downwards.
To avoid any damage to your bearing, the platter should be at room temperature before beginning
setup (approx. 20° Celsius).
Please avoid any sideways force to avoid any damage to the ceramic bearing.
Pic. 11a:
Setting up the stainless steel platter
Pic. 12: Setup finished
You can find various turntable adjustment accessories at
www.analogshop.de.
Page 14
Pic. 11b:
Setting up the platter
www.clearaudio.de
© clearaudio
electronic GmbH, 2022-11
or