Take The Picture - Pentax X90 Operating Manual

3
To use the flash, press the b button.
The flash pops up. (p.114)
4

Take the picture.

• In a mode, EV compensation is unavailable.
• [AUTO] cannot be selected for sensitivity.
• Flash modes , (Auto), b (Flash On), c (Auto + Red-eye) and d
(Flash On + Red-eye) are not available.
• A warning appears if there is a large difference between the current
exposure and the proper exposure. If the difference is greater than
±2.0EV, only the exposure warning icon is displayed. If the difference
is ±2.0EV or less, the exposure warning icon is displayed and the
difference between the current exposure and the proper exposure is
shown in increments of 1/3EV.
• The shutter speed and aperture value set in a mode are shared with
b and c modes. Changing the values in one mode automatically
changes the values in the other modes.
• When the shutter speed is set to a speed slower than 1/4 seconds, a
process to reduce image roughness and unevenness (noise
reduction) is performed.
• When the shutter speed or aperture value is changed, the new value
is displayed in a larger font size (height of 1.5×).
• Even when the zoom ratio is changed, the aperture value is
maintained. However, when the current aperture value cannot be used
with the selected zoom ratio, the closest aperture value is set. In this
case, if you change the zoom ratio again and the original aperture
value can be used, the setting returns to the original aperture value.
3
109