Take The Picture - Pentax K20D Operating Manual

132
5
Press the four-way controller (3) to select [Bracketing
amount] and press the four-way controller (5).
Use the four-way controller (23) to select the bracketing amount.
For [White Balance], select from BA±1, BA±2, BA±3, GM±1, GM±2 and
GM±3. The default setting is BA±1.
For [Saturation], [Hue], [Contrast] and [Sharpness], select from ±1, ±2,
±3 and ±4. The default setting is ±1.
6
Press the 4 button twice.
7
Press the 3 button.
4
The camera returns to the Capture mode.
8

Take the picture.

Three frames are saved.
• You can use Extended Bracket in combination with Exposure Bracket
(p.129).
• Extended Bracket and Multi-exposure cannot be used together. The mode
set last is used.
• Extended Bracket is disabled when File Format is set to RAW or RAW+.
• If Extended Bracket is set when File Format is set to RAW or RAW+, the file
format changes to JPEG.
• When Image Tone for Custom Image is set to [Monochrome], bracket
shooting with [Saturation] and [Hue] is not available.
Downloaded From camera-usermanual.com Pentax Manuals