Take The Picture - Pentax X-5 Operating Manual

5
Press the four-way controller (2)
to select [Save].
6
Press the 4 button.
The save process starts.
When the save process is completed, the camera returns to A mode
or Q mode.
To Take Pictures in A Mode
1
Set the mode dial to A.
The saved settings are retrieved.
2
Change the settings already saved in A mode as
necessary.
3
To use the flash, press the b button.
The flash pops up (p.84).
4

Take the picture.

The settings changed in A mode are only valid when the mode dial is
set to A. Changing the capture mode or turning off the power returns
the camera to the settings saved with [Save as A]. To change the
settings of A mode, perform the operations in [Save as A] again.
Save as USER
Saves current shooting
settings in USER mode
Save
Cancel
OK OK
3
81