Pentax X90 Operating Manual page 93

6
Press the 4 button.
The framed image appears on the display.
When the camera detects a person's face,
the Face Detection function is activated and
the face detection frame appears. (p.70)
7
Press the shutter release button halfway.
The focus frame (or face detection frame) on the display turns green
when the camera focuses on the subject at the correct distance.
To use the flash, press the b button to pop up the flash. (p.114)
8
Press the shutter release button fully.
The picture is taken.
• The number of recorded pixels is fixed at h (2048×1536).
• At shipment, the camera includes 3 default frames and 87 optional
frames built-in. (The CD-ROM supplied with the camera contains a
total of 90 frames, including the default frames.)
• In N mode, you cannot display "Grid Display" by pressing the u
button.
Optional Frames
The optional frames are stored in the built-in memory in the X90. These optional
frames are deleted if the files on the built-in memory are deleted with a
computer or the built-in memory is formatted. To reload the optional frames into
the built-in memory, copy the files from the CD-ROM (S-SW104) supplied with
the camera (p.187).
Adding a Frame to a captured image 1p.185
38 38 38
02/02/2010 02/02/2010 02/02/2010
14:25 14:25 14:25
3
91