Take A Picture - Pentax MX-1 Operating Manual

5
Press the 4 button.
The save process starts.
When the save process is completed, the camera returns to capture or
playback mode.
To Take Pictures in # Mode
1
Set the mode dial to #.
The saved settings are retrieved.
2
Change the settings already saved in # mode if
necessary.
3
To use the flash, slide the b lever.
The flash pops up (p.86).
4

Take a picture.

The settings changed in # mode are valid only when the mode dial
is set to #. Changing the capture mode or turning off the power
returns the camera to the settings saved with [Save as #]. To
change the settings of # mode, perform the operations in [Save as
#] again.
2
77