Pentax X90 Operating Manual page 97

1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45)
to select k and press the 4
button.
The current settings for interval shooting
appear for approximately 1 minute. To take
pictures with the current settings, proceed
to Step 7.
3
Press the 4 button.
The [Interval Shoot] screen appears.
4
Use the four-way controller (23)
to select [Interval], [Number of
Shots] or [Start Delay].
5
Press the four-way controller (5), then use the four-
way controller (23) to change the settings.
To change another setting, press the four-way controller (5).
6
When finished, press the 3 button.
The screen shown in Step 3 reappears.
The camera returns to capture status after approximately one minute.
7
Press the shutter release button halfway.
The focus frame (or face detection frame) on the display turns green
when the camera focuses on the subject at the correct distance.
L L M M H H
Drive Mode Drive Mode
Interval Shoot Interval Shoot
MENU Cancel Cancel
30 30 30 min. min. 0
Interval Interval
Number of Shots Number of Shots 20 20 20
Start Delay Start Delay
0 hr. 0 hr.
OK Change Change
Interval Shoot
Interval 0 min.
Number of Shots 2
Start Delay 0 hr.
MENU
OK OK OK
3
38 38 38
0 sec. sec.
0 0 min. min.
10 sec.
0 min.
95