Using A Wireless Lan - Pentax X90 Operating Manual

Using a Wireless LAN

You can transfer images via wireless LAN by using an SD Memory Card
with a built-in wireless LAN (Eye-Fi card).
Precautions When Using the Eye-Fi Card
• Eye-Fi cards that can be used with this camera are Eye-Fi Share and Eye-Fi
Share Video.
• If an outdated version of the Eye-Fi card is inserted into the camera, an error
message will appear.
• When using an Eye-Fi card for the first time, install the Eye-Fi Manager
software from the card to your computer before formatting the card.
• Use of an access point and an Internet connection are required for
transferring images via wireless LAN. For details, refer to the Eye-Fi website.
(http://www.eye.fi)
• Use Eye-Fi cards which have been updated to the newest firmware.
• Set [Eye-Fi] to P (Off), or do not use an Eye-Fi card in a location where the
use of wireless LAN devices is restricted or prohibited, such as airplanes.
• Eye-Fi cards can be used only in the country in which the card was
purchased. Please observe all local laws governing Eye-Fi card usage.
• This camera features a function to enable/disable the communication function
of the Eye-Fi card, however, we do not guarantee the operability of all Eye-Fi
card functions.
• Refer to the Eye-Fi card manual for details on how to use the card.
• Please contact the Eye-Fi card manufacturer regarding any malfunctions or
problems concerning Eye-Fi cards.
8
234