Pentax X90 Operating Manual page 35

Pentax x90: user guide
Table of Contents

Advertisement

2
Press the battery lock lever in the direction of 2 and
insert the battery so that the PENTAX logo is facing
toward the monitor display.
Match the marks on the battery to the marks inside the battery
compartment and push the battery in until it is locked in place.
Make sure that the battery is inserted with the PENTAX logo pointing
toward the monitor display. If the battery is incorrectly oriented,
malfunction may result.
3
Close the battery/card cover.
After closing the battery/card cover, slide the battery/card cover lock
lever in the opposite direction of 1.
To Remove the Battery
1
Open the battery/card cover.
2
Press the battery lock lever in the direction of 2.
The battery will be ejected. Take care not to drop the battery when
removing it.
• This camera uses a rechargeable lithium-ion battery D-LI106. Use of
any other type of battery may damage the camera and cause a
malfunction.
• Insert the battery correctly. If the battery is incorrectly oriented,
malfunction may result.
• Do not remove the battery while the camera is turned on.
• When storing the battery for more than 6 months, charge the battery
for 30 minutes using the battery charger and store the battery
separately.
Be sure to recharge the battery every 6 to 12 months. Storing the
battery at or below room temperature is ideal. Avoid storing it in high
temperatures.
• The date and time may be returned to the default setting if the camera
is left without the battery for a long time.
• Be careful as the camera or the battery may become hot when the
camera is used continuously for a long period of time.
1
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents