Setting The Ae Metering - Pentax X90 Operating Manual

5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
When [Highlight Correction] in [D-Range Setting] is set to O (On), select
from 160-200, 160-400, 160-800, and 160-1600.

Setting the AE Metering

3
You can set the area of the screen where the brightness is metered to
determine the exposure.
L Multi-segment
M
Center-weighted
N
Spot
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AE
Metering].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select a metering method.
128
The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
The camera takes a reading of the overall brightness of the
image with the center of the image having more influence on
the exposure.
The camera determines the exposure by metering the
brightness only at the center of the image.
Rec. Mode 2/4
AF Setting
AE Metering
Flash Exp. Comp.
Movie
D-Range Setting
Shake Reduction
Cancel
MENU
OK
OK