Setting The Iso Correction In Auto - Pentax X90 Operating Manual

6
Press the 3 button.
The camera returns to capture status.
• When the sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f (2592×1944).
• When D (4000×2672), E(4000×2256) or F(2992×2992) is
selected, you cannot select 3200 or 6400.
• When set to c (Digital SR), 9 (Green) or C (Movie) mode and A
(Burst Shooting(L)), B (Burst Shooting(M)) or C (Burst Shooting(H))
is selected as the drive mode, only [AUTO] is available.
• When set to S (Fireworks) mode, the sensitivity is fixed to the
minimum value.
• In a (Manual Exposure) mode, you cannot select [AUTO].
• When [Highlight Correction] in [D-Range Setting] is set to O (On), 160
is displayed as the sensitivity instead of 80 or 100.
Saving the Sensitivity setting 1p.144

Setting the ISO Correction in AUTO

Set the sensitivity range when the sensitivity is set to AUTO.
You can select from 80-100, 80-200, 80-400, 80-800, and 80-1600.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [ISO
Corction in AUTO].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the sensitivity
adjustment range.
Rec. Mode 1/4
Image Tone Bright
Recorded Pixels ISO80-100
ISO80-200
Quality Level
White Balance
ISO80-400
Sensitivity ISO80-800
ISO80-1600
ISO Corction in AUTO
Cancel
MENU
3
OK
OK
127