Take A Picture - Pentax K-7 Operating Manual

3
Press the four-way controller (5)
and use the four-way controller
(23) to select the number of
shots.
Select from 2 to 9 shots.
4
Press the 4 button.
5
Use the four-way controller (23) to select [Auto EV Adjustment]
and use the four-way controller (45) to select O or P.
When O (On) is set, the exposure is adjusted automatically according to
the number of shots.
6
Use the four-way controller (23) to select [Start
Shooting] and press the 4 button.
The camera returns to the Capture mode.
7

Take a picture.

The created picture is displayed in Instant Review each time the shutter
release button is pressed. Press the i button during Instant Review to discard
pictures created up to that point and create again from the first picture.
The picture is saved when the set number of shots has been taken, and
then the [Multi-exposure] screen appears again.
• When Multi-exposure is set, Interval Shooting and Extended Bracketing are
not available.
• Multi-exposure, Exposure Bracketing and Extended Bracketing cannot be
used at the same time. The mode set last is used.
• [Lens Correction] setting (p.201) is disabled when Multi-exposure is set.
• If any of the following operations are performed while shooting, the pictures
that have been already taken are saved and Multi-exposure is exited.
- The Q button, 3 button, four-way controller (2345), M
button or | button is pressed
- The mode dial is turned
- Exposure Bracketing is set
• When shooting in Multi-exposure mode using Live View, a semi-transparent
composite image of the pictures taken is displayed. (It is not displayed when
outputting to an external monitor.)
Multi-exposure
Start Shooting
Number of Shots
Auto EV Adjustment
MENU Cancel
147
2 times
OK OK
4