Lexmark CX532 User Manual page 142

Use printer menus
Menu item
Sides
Off*
Short Edge
Long Edge
Note: An asterisk (*) next to a value indicates the factory default setting.
Advanced Imaging
Menu item
Color Balance
Cyan (0*)
Magenta (0*)
Yellow (0*)
Color Dropout
Color Dropout (None*)
Default Red Threshold (128*)
Default Green Threshold (128*)
Default Blue Threshold (128*)
Auto Color Detect
Color Sensitivity (5*)
Area Sensitivity (5*)
E‑mail Bit Depth (1 bit*)
Minimum Scan Resolution (300 dpi*)
JPEG Quality
Best for content*
5–95
Contrast
Best for content*
0–5
Background Removal
Background Detection (Content‑based*)
Level (0*)
Mirror Image
Off*
On
Negative Image
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the orientation of the original document when scanning on both sides of
the document.
Description
Adjust the color intensity for cyan, magenta, and yellow.
Specify which color to drop during scanning, and adjust the dropout
setting for that color.
Configure the auto color detection setting.
Set the JPEG quality of the scanned image.
Specify the contrast for the scanned image.
Remove the background color or image noise from the original
document.
Notes:
•
Content-based removes the background color from the original
document.
•
Fixed removes image noise from a photo.
Create a mirror image of the original document.
Create a negative image of the original document.
142