Lexmark CX532 User Manual page 107

Use printer menus
Menu item
App Configuration
LES Applications
Off
On*
Scanner Configuration
Scanner Manual Registration
Print Quick Test
Scanner Configuration
Scanner Manual Registration
Front ADF Registration
Rear ADF Registration
Flatbed Registration
Scanner Configuration
Reset Maintenance Counter
Scanner Configuration
Edge Erase
Flatbed Edge Erase (3*)
ADF Edge Erase (3*)
Scanner Configuration
ADF Deskew
ADF Electronic Deskew (Auto*)
Scanner Configuration
Disable Scanner
No*
Yes
ADF Only
Scanner Configuration
Tiff Byte Order
CPU Endianness*
Little Endian
Big Endian
Scanner Configuration
Exact Tiff Rows Per Strip
On*
Off
Scanner Configuration
Scanner Glass Cleaning Threshold
1000–30000 (‑1*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Enable Lexmark Embedded Solutions (LES) applications.
Print a Quick Test target page.
Note: Make sure that the margin spacing on the target page
is uniform all the way around the target. If it is not, then the
printer margins must be reset.
Manually register the flatbed and ADF after replacing the ADF,
scanner glass, or controller board.
Reset the counter after replacing the ADF maintenance kit.
Set the size, in millimeters, of the no‑print area around an ADF
or flatbed scan job.
Set the printer to perform ADF mechanical skew adjustment.
Disable the scanner when it is not working properly.
Set the byte order of a TIFF‑formatted scan output.
Set the RowsPerStrip tag value of a TIFF‑formatted scan output.
Set the number of scans before the user is prompted to clean
the scanner glass.
107