Lexmark CX532 User Manual page 103

Use printer menus
Maintenance
Configuration Menu
Menu item
USB Configuration
USB PnP
1*
2
USB Configuration
USB Scan to Local
On*
Off
USB Configuration
USB Speed
Full
Auto*
Tray Configuration
Tray Linking
Automatic*
Off
Tray Configuration
Show Tray Insert Message
Off
Only for unknown sizes*
Always
Tray Configuration
Paper Prompts
Auto*
Multipurpose Feeder
Manual Paper
Tray Configuration
Envelope Prompts
Auto*
Multipurpose Feeder
Manual Envelope
Tray Configuration
Action for Prompts
Prompt user*
Continue
Use current
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Change the USB driver mode of the printer to improve its
compatibility with a personal computer.
Set whether the USB device driver enumerates as a USB
Simple device (single interface) or as a USB Composite device
(multiple interfaces).
Set the USB port to run at full speed and disable its high-speed
capabilities.
Set the printer to link the trays that have the same paper type
and paper size settings.
Display a message that lets the user change the paper size and
paper type settings after inserting the tray.
Set the paper source that the user fills when a prompt to load
paper appears.
Note: For Multipurpose Feeder to appear, in the Paper menu,
set Configure MP to Cassette.
Set the paper source that the user fills when a prompt to load
envelope appears.
Note: For Multipurpose Feeder to appear, in the Paper menu,
set Configure MP to Cassette.
Set the printer to resolve paper- or envelope-related change
prompts.
103