Sanyo VCC-HD4600P User Manual page 9

While displaying live video, the current zoom magnification is displayed on the screen.
<Zoom magnification display>
Optical zoom area: ×1.0 to ×10.0
Electronic zoom area: ×11 to ×160
Zoom magnification settings (ex. enabling/disabling the magnification display, displaying position)
can be configured via network operation on the VIDEO & AUDIO SETTINGS(TV OUT) screen.
The terminal outputs super-fine HD (High Definition) video signal. Use the terminal to connect a high-definition
monitor with HDMI interface.
For details, refer to the "Basic Connections" section.
The indicator also works as an error indicator.
Power indicator: The indicator lights up when the camera is powered on.
Error indicator: The indicator blinks when an error occurs.
To activate the power or error indicator, via network operation on the OPTION SETTINGS screen,
change the setting for [POWER LED (FRONT)] or [ERROR LED (FRONT)] respectively.
This bracket may be attached to either the top or bottom face of the camera depending on the installation
environment.
For bracket installation, be sure to use the longer screws supplied.
Introduction 9/23