Sanyo VCC-HD4600P User Manual page 33

Setting Item
1
RECORD STREAM
2
AUDIO
3
ALTERATION
DETECTION
4
ALARM EVENT1
5
TRIGGER (Recording
trigger conditions)
6
PRE ALARM
7
REC BUTTON
When finished configuring the above basic recording settings, configure the recording schedule as required.
3
On the RECORDING screen, click
Setting Item
1
SCHEDULE
2
SUN to SAT (START/END) 00:00/00:00
3
DAILY
Default Setting
OFF
OFF
OFF
OFF
ALARM IN1 (Triggers recording when
ALARM IN1 terminal receives an alarm
signal.)
OFF
OFF
SCHEDULE
Default Setting
OFF ON (Enables recording schedule configuration.)
Configure the start/end time of recording for each day of the week.
(Ex.: 08:00/20:00)
00:00/00:00 Select this check box to set the same start/end time for every day.
Select the desired stream (STREAM1 to
STREAM4).
ON (Records video and sound simultaneously)
ON (Detects tampered images)
ON
You can configure three patterns of recording
conditions (for ALARM EVENT1 to 3).
ALARM IN2, MOTION, ALARM OUT1/2,
NETWORK FAILURE
ON (Records video for a specific period before
alarm occurrence.)
ON (Records video using the emergency
recording button on the live screen control
panel)
.
Required Setting
Required Setting
Quick Operation Guide 10/14