Sanyo VCC-HD4600P User Manual page 50

Operation Privileges
admin admin
operator1 operator1
operator2 operator2
guest guest
download download
The factory default users cannot be deleted.
Update your password periodically for security reasons.
For details, refer to the "USER REGISTRATION" section.
If you forget your password, use the buttons provided on the left-side face of the camera to restore
the default user passwords.
For details, refer to the topic "Side Face" in the "Name and Function of Each Component" section.
Client users (Max. 20 users)
Using the admin user privilege, you can set up to 20 client users as desired, by specifying the user name,
password, and operation privilege information.
For details, refer to the "USER REGISTRATION" section.
You may set two or more admin users.
Up to 20 users have access to one camera at a time.
If two or more users with the same operation privilege, for example, two admin users, log into the
system, the user who log in last will take precedence.
If you need to limit the PCs allowed (or disallowed) to access the camera for security reasons, you
can register the IP addresses of those PCs on the SECURITY SETTINGS screen.
Updating of live video may become slower depending on your system environment as the number of
login users increases.
The number of users who can connect to the system simultaneously may be limited depending on
the display resolution setting.
Using the supplied "VA-SW3050Lite" monitoring software or the optional "VA-SW3050 Server/Client"
recording/playback software also provides simultaneous access to the camera from your Web
browser. However, if the user who is using the software configures one of the following settings, the
Web-based admin user will be disconnected from the camera.
Camera Setting
Normal Recording & Live Setting (JPEG)
Live Setting (H.264)
Alarm Setting
User Password (Default)
admin
operator1
operator2
guest
download
Before You Begin Network Operation 13/13